Table of Contents
Advertisement
Configuration Options via Command Line (Cont.)
Display a List of Transcoder Cards Installed in the Chassis
1. Access the HCS6320 Main Menu as described on page 30.
[Main] Command > prompt, type list and press Enter.
2. At the
The display identifies the type of transcoder cards installed and their serial numbers, for
example:
Available cards:
Card
1: [HCS7720] [001-12080017]
Card
2: [HCS7720] [001-12080018]
Card
3: [-]
Card
4: [HCS7720] [001-12080019]
Card
5: [HCS7720] [001-12080020]
Card
6: [-]
Card
7: [-]
Card
8: [HCS7720] [001-12080021]
Card
9: [HCS7720] [001-12020006]
Card 10: [-]
Card 11: [HCS7720] [001-12080023]
Card 12: [HCS7720] [001-12080024]
Access Individual Transcoder Menus
See "Transcoder Menu Commands" on pages 39 to 42 for detailed information on transcoder
configuration options.
Perform an External Card Reset
1. Access the HCS6320 Main Menu as described on page 30.
[Main] Command > prompt, type xrst and press Enter.
2. At the
Enter card number (1-12, 'ctr', or 'all') > prompt, either:
3. At the
• Type the slot number of the card and press Enter to reset a single transcoder card.
• Type all and press Enter to reset each of the transcoder cards.
• Type ctr and press Enter to reset the HCS6320.
f you opt to reset one or more of the transcoder cards, the system will display confirmation
before initiating the reset of the selected card(s), for example:
Resetting card 5:
If you opt to reset the HCS6320, the system will initiate the reset immediately without further
confirmation.
32
Get other manuals https://www.bkmanuals.com
206-4183
Advertisement
Table of Contents
