Toro Groundsmaster 7200 Series Operator's Manual page 2

This product complies with all relevant European
directives; for details, please see the separate
product-specific Declaration of Conformity (DOC)
sheet.
WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical
or chemicals known to the State of
California to cause cancer, birth defects,
or reproductive harm.
Diesel engine exhaust and some of its
constituents are known to the State of
California to cause cancer, birth defects,
and other reproductive harm.
It is a violation of California Public Resource Code
Section 4442 or 4443 to use or operate the engine on
any forest-covered, brush-covered, or grass-covered
land unless the engine is equipped with a spark
arrester, as defined in Section 4442, maintained in
effective working order or the engine is constructed,
equipped, and maintained for the prevention of fire.
The enclosed engine owner's manual is supplied
for information regarding the US Environmental
Protection Agency (EPA) and the California Emission
Control Regulation of emission systems, maintenance,
and warranty. Replacements may be ordered through
the engine manufacturer.
Introduction
This machine is a ride-on, rotary-blade lawn mower
intended to be used by professional, hired operators
in commercial applications. It is primarily designed
for cutting grass on well-maintained lawns in parks,
sports fields, and on commercial grounds. It is not
designed for cutting brush, mowing grass and other
growth alongside highways, or for agricultural uses.
Important:
To maximize the safety, performance,
and proper operation of this machine, carefully
read and fully understand the contents of this
Operator's Manual. Failing to follow these
operating instructions or to receive proper
training may result in injury. For more information
on safe operating practices, including safety tips
and training materials, go to www.Toro.com.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
© 2018—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready.
identifies the location of the model and serial numbers
on the product. Write the numbers in the space
provided.
Important:
With your mobile device, you can
scan the QR code on the serial number decal (if
equipped) to access warranty, parts, and other
product information.
1. Model and serial number location
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety-alert symbol
(Figure 2), which signals a hazard that may cause
serious injury or death if you do not follow the
recommended precautions.
1. Safety-alert symbol
This manual also uses 2 words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
2
Figure 1
Figure 1
Figure 2
Contact us at www.Toro.com.
Printed in the USA
All Rights Reserved
g241316
g000502