Energy Saving Tips - Pioneer QUANTUM INVERTER Series Owners And Installation Manual

One-way cassette
Hide thumbs Also See for QUANTUM INVERTER Series:
Table of Contents

Advertisement

Active Clean function (Multi-Zone Systems models
do not have this function)
The Active Clean Technology washes away
dust when it adheres to the heat exchanger by
automatically freezing and then rapidly thawing
the frost. A "pi-pi" sound will be heard.
The Active clean operation is used to produce
more condensed water to improve the cleaning
e ect, and the cold air will blow out. After
cleaning, the internal wind wheel then keeps
operating with hot air to blow-dry the evaporator,
thus keeping the inside clean.
- When this function is turned on, the indoor
unit display window appears "CL " , after 20 to
130 minutes, the unit will turn o automatically
and cancel Active Clean function.
- For some units, the system will start high
temperature cleaning process, and the
temperature of air outlet is very high.
Please keep away from it. And this would lead
to the rising of the room temperature .

Energy Saving Tips

• DO NOT set the unit to excessive temperature levels.
While cooling, close the curtains to avoid direct sunlight.
Doors and windows should be kept closed to keep cool or warm air in the room.
DO NOT place objects near the air inlet and outlet of the unit.
Clean the air lter every two weeks.
Adjust louvers properly and avoid direct airflow.
Closing curtains during heating also helps keep the heat in.
Doors and windows should be kept closed.
Lifting panel operation
In the stand-by mode, press the "Mode" and
"Down" buttons for 3 seconds at the same time,
the remote controller enters the setting panel
state, and the remote controller displays "F2".
When setting the panel status, press the "Up"
or "Down" buttons of the remote controller to
control the rise or fall of the grille, and press any
other button to exit the setting.
The up and down height of the panel can
reach a maximum of 1.5 meters. During the
decline, if the grille is raised by the obstacles,
it will stop. During the ascending process, if
the grille is blocked and does not rise to the
correct height or a nger is pinched, it will
automatically descend after a period of time
and then ascend. If the grille is bocked for the
third times, then the display panel will report
an error and prompt for manual processing.
Breeze Away
This feature avoids direct air ow blowing on
the body and make you feel indulging in
silky coolness.
Page 11

Advertisement

Table of Contents
loading

Table of Contents