Pioneer QUANTUM INVERTER Series Owners And Installation Manual page 44

Install the control box cover and turn the
●
circuit breaker to ON, then close the two plastic
covers on both sides of the panel.
During the test-run process, the display
●
wil be lighted and the air griller will rise
automatically.
Model B
Press the circular positon to open the two
●
screw covers, then remove the two screws.
Hold and open the air grille, then push both
●
of the latch to the middle to unlock the air grille.
Page 44
 
Screw Covers
Latch
Pull the panel grille out of the panel, x the
●
cassette panel to the one-way cassett by two
plastic buckles.
palstic buckle
Manually rotate the air de ector, x the panel
●
to the cassette by using 3×M4*22 screws and a
ST3.9*16 screw.
M4*22 screw
NOTICE
Eight M4*22 screws are
supplied, two of which are
spare. Two ST3.9*16 screws
are supplied, one of which is spare.
Before xing this screw, you need to open the screw cover;
and after xing screw, please close the cover.
Open the two covers on both sides of the panel ,
●
x the panel to the cassette by using 3× M4*22
screws.
M4*22 screw
ST3.9*16 screw