Table of Contents
Advertisement
AFTER CLEANING, REPLACE THE
INNER GLASS PANE
When replacing the inner glass pane, make
sure that:
•
You replace the pane correctly, as
shown . The pane must be in the
position described below in order to
fit into the door and to ensure that the
oven operates safely and correctly .
To reassemble the inner pane of the oven
door operate as follows:
1 .
Make sure the door is locked open
(see fig. 8.9c).
2 .
Replace the inner pane:
•
Check that the four rubber pads are in
place ("D" in fig. 8.13a).
IMPORTANT: It is advisable, while
refitting the glass, to keep pressed in
position the four rubber pads "D", by a
finger, to avoid breakage or slippage
of the rubber pads themselves (fig.
8 .13b) .
•
Check that you are holding the pane
the correct way . You should be able to
read the wording on it as it faces you .
•
Insert the pane in the left "E" and right
"F" slide guides (fig. 8.13b), and gently
slide it to the retainers "H" (fig. 8.13c).
•
Gently push the glass retainer back
into place . You should be able to hear
the tabs on both sides click as they
lock the glass retainer in (fig. 8.13d).
•
Unlock the oven door by opening it
completely and closing the lever "A"
on the left and right hinges (fig. 8.13e).
Click
34
Fig. 8.13a
Fig. 8.13b
Fig. 8.13c
Click
Fig. 8.13d
Fig. 8.13e
D
E
A
F
H
Advertisement
Table of Contents
