Basic Settings; When Starting For The First Time - Fujitsu AIRSTAGE UTY-ABGXZ1 Instruction Manual

7.

Basic Settings

In this section, the basic settings necessary before use in the PC are explained. The settings that are also
necessary when equipment configuration changes are also explained here.
When starting the system for the first time after installation, make the settings in accordance with the flow
described below. At the 2nd and subsequent starting, make the necessary settings in accordance with sub-
sequent paragraphs, as required.
7-1

When Starting for the First Time

When starting the BACnet ®
● Setting for First Time Use
7-2 "Selection of Unit Data Acquisition Method"
To perform "Adaptor Setting". ............................. (a)
To import backed up data. .................................. (b)
(b)
OK
7-3 "Login Setting"
7-4 "Initial Setting"
7-5 "Adaptor Setting"
7-6 "Unit Registration"
®
BACnet Gateway
program ends.
Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.
Gateway for the first time, perform the settings in accordance with this flow.
(a)
OK
OK
OK
● Transmission adaptor selection
● Transmission Adaptor Name setting
● Transmission line connection confirmation
OK
● Scanning range
● Device confirmation
OK
Main screen
36
Cancel
Cancel
Cancel
Cancel
Cancel
®
BACnet Gateway program ends.
(When Cancel is selected, Setting is stopped.
Setting must be repeated from the beginning.)