Table of Contents
Advertisement
Question
No.
Answer
I want to replace the PC with a new PC. Can the data be transferred?
9.
®
The BACnet
Gateway has data "Export" and "Import" functions.
For details, see the "Import/Export" page.
Unit expansion, replacement, and removal were performed. How can I reflect these changes at the
BACnet
®
Gateway?
11.
Perform scanning again.
VRF System expansion, replacement, and removal were performed.
11.
After setting the U10 USB Network Interface adaptor correctly, recognize the units by scanning.
→ 7-4 "Initial Setting" , 7-5 "Adaptor Setting", 7-6 "Unit Registration"
The state displayed on the screen does not change even though operation setting is performed.
12.
When operation setting was performed at multiple units or at a group containing multiple units, it may take
some time for the state of that unit to change to the set contents.
Can a transmission adaptor (UTR-YTMA) be used with the BACnet
13.
Transmission adaptor (UTR-YTMA) cannot be used with the BACnet
Can a WIBU-KEY used by a UTY-ABGX be used by UTY-ABGXZ1?
14.
Yes.
Can a WIBU-KEY used by a UTR-YLBA be used by UTY-ABGX/UTY-ABGXZ1?
15.
No. it cannot be used.
®
Can a XLON
used by a UTR-YLBA be used by the UTY-ABGX/UTY-ABGXZ1?
16.
No. it cannot be used.
When an error, etc. occurs at SQL Server 2014 installation while this application is installed
For the identification of reason and the countermeasures, check the contents of log file in the following
17.
folder.
C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log
Why is an electricity charge generated even though none of the indoor units is being used?
Since power is consumed by the outdoor unit even when all the indoor units are not in use, an electricity
18.
charge is generated.
To prevent generation of an electricity charge, turn off the power of that indoor unit and perform scan to
remove the indoor unit from the electricity charge apportionment function objectives.
Why isn't the operation time and electricity charge proportional?
If the room temperature has reached the set temperature even if the operation is turned ON by a remote
controller, the indoor unit will not operate and the power consumption will be that much lower.
19.
In addition, if the difference between the room temperature and the set temperature is large, more power
is consumed than when the difference is small. Therefore, the operation time and electricity charge may
not necessarily be proportional.
Why is the electricity charge of operated indoor units so much smaller than that of indoor units that are not
operated at all?
Electricity charge includes the power consumed by the outdoor unit in addition to that of the indoor unit.
The outdoor unit consumes power constantly so that operation at any time is possible even though indoor
units are not operating. This is called the "standby power". Since the standby power differs between the
21.
models of outdoor units, if the number of indoor units per outdoor unit is assumed to be the same, the
indoor units which use an outdoor unit will consume more power than indoor units which use with high
standby power.
This question is an example of when the difference of this standby power was larger than the power con-
sumed by operation. This is a normal result. Generally, this kind of difference is made small by selecting
the model of outdoor unit based on appropriate facility design.
Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.
→ 7-6 "Unit Registration".
79
®
Gateway?
®
Gateway.
Advertisement
Table of Contents
