Storage; Troubleshooting - Silvercrest SBT 1.5 A1 Operating Instructions Manual

6) Place the rotating blades
so that the rotating blades
7) Push the connecting piece
protruding spacer of the connecting piece
you (see fig. 1). Ensure that the indentations on the cutting head
cover slide into the catches on the inside of the cutting head
cover .
8) Push the connecting piece
into place and sits tightly.
9) Replace the shaving head
head in the direction of the arrow
the shaving head
10) Replace the protective cap

Storage

■ Always protect the shaving head
cap .
■ Store the appliance in a dry and dust-free location.

Troubleshooting

The appliance is not working:
■ Replace the battery.
■ The appliance is defective. Contact the Customer Service department.
Not all hairs are plucked:
■ You are working too fast. Move the appliance over your skin slowly.
│ GB │ IE
■ 30
centred into the cutting head cover
rest against the cutting head cover
into the cutting head housing
firmly downwards so that it clicks
on the housing and turn the shaving
points to the marking on the housing.
on the housing.
with the supplied protective
. The
must point towards
until the marking on
SBT 1.5 A1
,
.