Operating the
Bag-on-Demand Lever
The bag-on-demand feature allows you to either
collect or recycle grass and leaf clippings while the
grass bag is attached to the machine.
•
To bag the grass and leaf clippings, press the
button on the bag-on-demand lever and move the
lever forward until the button on the lever pops up
(Figure
12).
Figure 12
1. Bag-on-demand lever (in
the recycling position)
•
To recycle the grass and leaf clippings, press
the button on the lever and move the lever
rearward until the button on the lever pops up.
Important:
For proper operation, remove
any grass clippings and debris from the
bag-on-demand door and the surrounding
opening
(Figure
13) before you move the
bag-on-demand lever from 1 position to
another.
Figure 13
1. Clean here
g251583
2. Bag-on-demand lever (in
the bagging position)
g251584
Adjusting the Blade Speed
This machine has 2 blade-speed settings: A
M
.
AX
•
When set to the A
is adjusted automatically for greater efficiency;
changes in cutting conditions are detected and
the blade speed increases when necessary to
maintain quality of cut.
•
When set to the M
remains at the highest speed at all times.
Turn the key in the key switch to either position to
adjust the blade speed setting
1. A
position
UTO
15
position, the blade speed
UTO
position, the blade speed
AX
(Figure
14).
Figure 14
2. M
position
AX
and
UTO
g337279