Raising And Lowering The Seat - Toro Groundsmaster 360 Operator's Manual

1. Backrest knob
2. Seat-suspension knob
2. Slide the seat to the desired position and release the
lever to lock the seat in position.
3. Verify that the seat has locked into place by attempting
to move it back and forth.
Changing the Seat Suspension
You can adjust the seat to provide a smooth and comfortable
ride. Position the seat where you are most comfortable.
Without sitting on the seat, turn the knob in front in either
direction to provide the best comfort
1. Seat-suspension knob
Changing the Back Position
You can adjust the back of the seat to provide a comfortable
ride. Position the back of the seat where it is most
comfortable.
Figure 13
3. Lumbar-support-adjustment
knob
4. Seat-position-adjustment
lever
(Figure 13).
Figure 14
2. Operator-weight setting
To adjust the back of the seat, turn the knob, located under
the right-side armrest, in either direction to provide the best
comfort (Figure 13).
Changing the Lumbar Support
You can adjust the back of the seat to provide a customized
lumbar support for your lower back.
To adjust the back of the seat, turn the knob, under the
left-side armrest, in either direction to provide the best
comfort (Figure 13).

Raising and Lowering the Seat

To access the hydraulic and other systems under the seat, you
must unlatch the seat and swing it forward.
g004478
1. Move the seat latch, located on the left side of the seat,
rearward to unlatch the seat and pull forward on the
top of the seat
1. Seat latch
2. To lower the seat, pull up the seat-latch-release bar and
lower the seat into the locked position.
g004489
21
(Figure 15).
Figure 15
g014174