Hitachi ASU-1014 Instruction Manual page 3

Introduction
This is an instruction for model ASU-1014, an
Read the manual carefully before using the instrument. Take special note of the items in section 1, "Safety
Precautions".
Keep this manual securely for future reference.
The CE mark on the scanner indicates that this scanner is valid when it is connected to equipment
bearing the CE mark that is specified as available in section 2 of this document.
scanner bearing the CE mark is connected to equipment that is specified as available but does not
have a CE mark, part of this instruction manual may not
Symbols used in this document
The terms below are used in the safety information provided to prevent hazards and injuries to the operator
or patients. The severity of the hazard and injury that can occur when failing to observe the displayed safety
information are indicated in four levels: "Danger","Warning","Caution" and "Note".
Danger
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury to
the operator or patient.
Warning
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury to
the operator or patient.
Caution
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury to
the operator or patient, or property damage only.
Note
Indicates a strong request concerning an item that must be observed in order to prevent damage or
deterioration of the equipment and also to ensure that it is used efficiently.
The type of safety information is indicated by the symbols below.
This symbol means attention is required.
This symbol means that the described action is prohibited.
This symbol means the described action is mandatory.
ultrasound scanner.
apply.
-iii-
MN1-5933 Rev.5
Therefore, if a