Huawei STS-3000K-H1 Installation Manual page 76

STS-(3000K, 6000K)-H1 Smart Transformer Station
(Spain, Eiffage Turroneros)
Installation Guide
Figure A-2 Wiping a polished or damaged area using anhydrous alcohol
Step 3 Paint zinc-rich primer on the damaged coat using a brush or painting gun.

If the base material is exposed in the area to be repaired, apply epoxy zinc-rich primer,
wait until the paint has dried, and then apply acrylic acid top coating.

Select epoxy zinc-rich primer or acrylic acid top coating with a color the same as the
surface coating color of the equipment.
Step 4 Apply paint evenly to the damaged area based on the damage degree of the paint using a spray
bottle, brush, or painting gun until all damage traces are invisible.

Ensure that the painting is thin, even, and smooth.

In the case that a container pattern has different colors, to prevent undamaged areas and
those with different colors as the damaged area from being polluted during repainting,
cover such areas using white paper and adhesive tape before repairing paint.
Figure A-3 Repainting a damaged area
Issue 02 (2020-02-21) Copyright © Huawei Technologies Co., Ltd.
A FAQ
70