Two Workers For Maintenance When Engine Is Running; Proper Tools - Komatsu GALEO PC1250-8 Operation & Maintenance Manual

SAFETY MAINTENANCE INFORMATION

TWO WORKERS FOR MAINTENANCE WHEN ENGINE IS RUNNING

To prevent personal injury, do not carry out maintenance with the engine running. If maintenance must be carried
out with the engine running, carry out the operation with at least two workers and do as follows.
One worker must always sit in the operator's seat and be ready to stop the engine at any time. All workers must
maintain contact with the other workers.
When carrying out operations near the fan, fan belt, or other
rotating parts, there is a hazard of being caught in the parts, so
be careful not to come close.
Never drop or insert tools or other objects into the fan or fan belt.
Parts may break or be sent flying.
Set lock lever (1) to the LOCK position (L) to prevent the work
equipment from moving.
Do not touch any control levers or control pedals. If any control
levers or control pedals must be operated, always give a signal
to the other workers to warn them to move to a safe place.

PROPER TOOLS

Use only tools suited to the task and be sure to use the tools
correctly. Using damaged, low quality, faulty, makeshift tools or
improper use of the tools could cause serious personal injury.
2 - 36
SAFETY