Maintenance Schedule; Maintenance Schedule Chart - Komatsu GALEO PC1250-8 Operation & Maintenance Manual

MAINTENANCE SCHEDULE

MAINTENANCE SCHEDULE

MAINTENANCE SCHEDULE CHART

INITIAL 100 HOURS MAINTENANCE (ONLY AFTER THE FIRST 100 HOURS)
CLEAN STRAINER OF PTO LUBRICATING OIL FILTER
INITIAL 500 HOURS MAINTENANCE (ONLY AFTER THE FIRST 500 HOURS)
CHANGE OIL IN SWING MACHINERY CASE
CHANGE OIL IN PTO CASE
CHANGE OIL IN FINAL DRIVE CASE
WHEN REQUIRED
CHECK, CLEAN AND REPLACE AIR CLEANER ELEMENT
CLEAN INSIDE OF COOLING SYSTEM
CHECK AND TIGHTEN TRACK SHOE BOLTS
CHECK AND ADJUST TRACK TENSION
REPLACE BUCKET TEETH (XS)
ADJUST BUCKET CREARANCE
CHECK WINDOW WASHER FLUID LEVEL, ADD FLUID
CHECK AND MAINTENANCE AIR CONDITIONER
CLEAN LINE FILTER, REMOVE DIRT
CHECK GAS SPRING
BLEEDING AIR FROM HYDRAULIC SYSTEM
BLEEDING AIR FROM FULE CIRCUIT
CHECKS BEFORE STARTING
EVERY 10 HOURS MAINTENANCE
LUBRICATING
EVERY 100 HOURS MAINTENANCE
LUBRICATING SWING CIRCLE
EVERY 250 HOURS MAINTENANCE
CHECK OIL LEVEL IN FINAL DRIVE CASE, ADD OIL
CHECK LEVEL OF BATTERY ELECTROLYTE
CHECK AND TIGHTEN TRACK FRAME AND AXLE CONNECTING BOLTS
4 - 14
MAINTENANCE
4- 59
4- 66
4- 68
4- 74
4- 17
4- 20
4- 24
4- 25
4- 28
4- 32
4- 33
4- 34
4- 35
4- 36
4- 37
4- 40
4- 44
4- 46
4- 47
4- 48
4- 50