DETAILED CONTROLS AND GAUGES
CONTROLLER
Controller installed.
NOTICE
Be careful not to get water, mud, or juice on the controller. This will cause failure.
The engine controller has been given moisture prevention treatment, so there is no problem if rain gets on it, but do not spray
it with water when washing the machine.
If any abnormality occurs in the controller, do not disassemble it yourself. Contact your Komatsu distributor for repairs.
Engine controller
This is under the fuel pre-filter inside the engine room.
Pump controller
This is on the rear of the operator's seat.
TOOL BOX
(Cloth bag)
Open the door of the tool box at the rear of the cab. The cloth bag
is stored inside the box.
3 - 70
OPERATION