Table of Contents
Advertisement
OPERATION
FUSIBLE LINK
If the starting motor is not cranked when the starting switch is
turned START, there is probably a disconnection in fusible link (1)
(2 places). Open the battery box cover on the right side of the
machine and carry out inspection and replacement.
REMARK
A fusible link refers to the large-sized fuse wiring installed in the
high current flow portion of the circuit to protect electrical
components and wiring from burning, in the same way as an
ordinary fuse.
CONTROLLER
Controller installed.
NOTICE
Do not let water, mud, or juice spill on the controller. This will cause
failures.
If any problem occurs in the controller, do not repair it by yourself.
Please contact your Komatsu distributor for repairs.
TOOL BOX
Store the tools in this box.
GREASE PUMP HOLDER
The grease pump holder is installed on the inside of the rear left
door of the body. Keep the grease pump hooked on this holder
while it is not used.
DETAILED CONTROLS AND GAUGES
3 - 109
Advertisement
Chapters
Table of Contents
