Cap With Lock - Komatsu ecot3 Operation And Maintenance Manual

DETAILED CONTROLS AND GAUGES

CAP WITH LOCK

Use the starting switch key to open and close the locks on the caps and covers.
For details of the locations of the caps and covers with locks, see "LOCKING (PAGE 3-175)".
Insert the key as far as it will go to the shoulder (A). If the key is
turned before it is inserted all the way, it may break.
Opening and Closing Caps with Lock
Opening the Cap
1. Insert the key into the key slot.
2. Turn the key clockwise, align the key groove with mark (1) on
the cap, then open the cap.
Position (A): OPEN
Position (B): LOCK
Locking the Cap
1. Turn the cap until tight, then insert the key into the key slot.
2. Turn the starting switch key to LOCK position (B), then remove the key.
3 - 86
OPERATION