Table of Contents
Advertisement
OPERATION
Securing Machine
NOTICE
Stow the radio antenna. Reassemble the mirrors so that they are within the width of the machine.
To prevent damage to the bucket cylinder during transportation, put a wooden block under the tip of the bucket link to prevent
the bucket cylinder from touching the floor.
Check that the engine hood catch is locked. Hold the grip of the engine hood and raise it slightly. If it does not open, the catch
is locked.
If the engine hood catch is not locked, there is danger that the engine hood may open during transportation.
Load the machine onto a trailer as follows:
1. Extend the bucket and arm cylinders fully, then lower the boom
slowly.
2. Set the lock lever securely to the LOCK position (L).
3. Stop the engine, then remove the key from the starting switch.
4. Close all doors, windows, and covers.
Lock the covers, caps, and doors fitted with locks.
5. Place blocks under both ends of the tracks to prevent the
machine from moving during transportation, and secure the
machine with chains or wire rope of suitable strength.
Be particularly careful to secure the machine in position so it
does not slip to the side.
TRANSPORTATION
3 - 181
Advertisement
Chapters
Table of Contents
