After Storage; Starting Machine After Long-Term Storage - Komatsu ecot3 Operation And Maintenance Manual

OPERATION

AFTER STORAGE

NOTICE
If the machine has been stored without carrying out the monthly rust-prevention operation, consult your Komatsu distributor
before using it.
When using the machine after long-term storage, do as follows before using it.
Wipe off the grease from the hydraulic cylinder rods.
Add oil and grease at all lubrication points.
When the machine is stored for a long period, moisture in the air will mix with the oil. Check the oil before and after
starting the engine. If there is water in the oil, change all the oil.

STARTING MACHINE AFTER LONG-TERM STORAGE

When starting the engine after long-term storage, carry out the warming-up operation thoroughly. For details, see
"Engine Warm Up (PAGE 3-137)".
LONG TERM STORAGE
3 - 193