Komatsu ecot3 Operation And Maintenance Manual page 381

ATTACHMENT GUIDE
PC200, 200LC
This table lists the combination of attachments which can be installed to the long arm (standard), short arm and
extension arm.
: Can be used
: Can be used only for light duty work
: Cannot be used
NOTICE
When the extension arm is equipped, if the bucket is drawn to the machine body, the arm interferes with the body. Operate the
extension arm carefully.
When the boom is fully lowered during oblique digging, the boom interferes with the undercarriage.
Operate the boom carefully.
Categories of use
For general digging: Digging or loading sand, gravel, clay etc.
For light duty digging: Digging or loading dry, uncaked earth and sand, mud etc.
For loading work: Loading dry, loose earth and sand
For digging or loading hard soil or soft rock, it is recommended that the strengthened bucket with high durability
and high wear resistance be employed.
*: Equipped with side cutter
Name of bucket
*Narrow bucket
*Narrow bucket
*Standard bucket
*Light duty bucket
Light duty bucket
Light duty bucket
Slope finishing bucket
Trapezoidal bucket
(Variable slope type)
Ripper bucket
Clamshell bucket
Ditch cleaning bucket
One tooth ripper
Three teeth ripper
6 - 24
Outside
Capacity
width
3
m
mm
(cu.yd)
(ft in)
0.50 750
(0.65) (2' 6")
0.60 970
(0.78) (3' 2")
0.8 1,150
General digging
(1.05) (3' 9")
0.9 1,200
Light duty digging
(1.18) (3' 11")
1.0 1,330
(1.3) (4' 4")
1.17 1,450
(1.5) (4' 9")
0.40
-
(0.52)
0.55
-
(0.72) shaped diching
0.61 950
(0.80) (3' 1")
0.66 866
Ditching, loading
(0.86) (2' 10")
0.8 1,800
Ditching, cleaning
(1.05) (5' 11")
- -
removing rocks
- -
removing rocks
Standard
arm
Use
2.9 m
(9 ft 6 in)
Narrow digging
Narrow digging
Loading
Loading
Slope finishing
Trapezoidal
Digging rocks
Digging,
Digging,
ATTACHMENTS AND OPTIONS
Short Short Extension
arm arm
2.4 m 1.8 m
(7 ft 10 in) (5 ft 11 in) (3 ft 7 in)
arm
1.1 m