Table of Contents
Advertisement
OPERATION
SUN ROOF
When leaving the operator's seat, set the lock lever securely to the LOCK position.
If the lock lever is at the FREE position and the control levers or control pedals is touched by mistake, this may lead to a serious
accident.
Opening
1. Set the lock lever (1) securely to the LOCK position (L).
2. Push up lock (A) in the front center of the roof window and
check that the lock is released. Then hold grip (B) and push up
the roof window.
Closing
Hold grasping grip (B), lower the ceiling window, and apply lock (A). If the lock cannot be applied, open the ceiling
window, then pull it in again and apply the lock.
WINDSHIELD
When opening or closing the front window, bottom window, or door, always set the lock lever to the LOCK position.
If the lock lever is at the FREE position and the control levers or control pedals is touched by mistake, this may lead to a serious
accident.
When opening or closing the front window, stop the machine on horizontal ground, lower the work equipment completely to
the ground, stop the engine, then carry out the operation.
When opening the front window, hold the grip securely with both hands, pull up, and do not let go until the automatic lock catch
is locked.
When closing the front window, the window will move quicker under its own weight. Hold the grips securely with both hands
when closing it.
It is possible to stow (pull up) the front window in the roof of the operator's compartment.
WARNING
WARNING
DETAILED CONTROLS AND GAUGES
3 - 79
Advertisement
Chapters
Table of Contents
