Precautions When Getting On Or Off Machine; Use Handrails And Steps When Getting On Or Off Machine - Komatsu ecot3 Operation And Maintenance Manual

Hide thumbs Also See for ecot3:
Table of Contents

Advertisement

SAFETY
Fire coming from piping
Check that all the hose and tube clamps, guards, and cushions are securely fixed in position.
If they are loose, they may vibrate during operation and rub against other parts. There is danger that this may lead
to damage to the hoses and cause high-pressure oil to spurt out, leading to fire, serious personal injury or death.
Explosion caused by lighting equipment
When checking fuel, oil, battery electrolyte, or coolant, always use lighting with anti-explosion specifications.
When taking the electrical power for the lighting from the machine itself, follow the instructions in this manual.

PRECAUTIONS WHEN GETTING ON OR OFF MACHINE

USE HANDRAILS AND STEPS WHEN GETTING ON OR OFF MACHINE

To prevent personal injury caused by slipping or falling off the machine, always do as follows.
Use the handrails and steps marked by arrows in the diagram on
the right when getting on or off the machine.
Always face the machine and maintain at least three-point
contact (both feet and one hand, or both hands and one foot)
with the handrail and steps to ensure that you support yourself.
Before getting on or off the machine, check the handrails and steps, and if there is any oil, grease, or mud on
them, wipe it off immediately. In addition, repair any damage and tighten any loose bolts.
Do not grip the control levers or lock lever when getting on or off the machine.
Never climb on the engine hood or covers where there are no non-slip pads.
Do not get on or off the machine while holding tools in your hand.
The collapsible type side mirror can turn, so do not grab hold of it as a handrail.
GENERAL PRECAUTIONS COMMON TO OPERATION AND MAINTENANCE
2 - 17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pc220lc-8Pc200lc-8Pc220-8Pc200-8Pc220-85001

Table of Contents