Komatsu ecot3 Operation And Maintenance Manual page 262

Hide thumbs Also See for ecot3:
Table of Contents

Advertisement

OPERATION
Electronic Control System
When the user code is shown on the display portion of the machine
monitor, take the respective measures shown in the self-diagnosis
chart below.
Machine Monitoring System
Monitor
Failure mode
display
E02
Pump control system error
E03
Swing brake system error
Engine controller power source error
E10
Engine controller drive system circuit
error (engine stopped)
Engine controller system error
E11
Output reduced to protect engine
E14
Abnormality in throttle system
Engine sensor (coolant temperature,
E15
fuel pressure, oil pressure) system
error
E0E
Network error
(*1): For details of handling the emergency pump drive switch, see "Emergency Pump Drive Switch (PAGE 3-74)".
(*2): For the replacement of the fuel main filter element, see "REPLACE FUEL MAIN FILTER CARTRIDGE (PAGE
4-70)" and for the replacement of the fuel pre-filter element, see "REPLACE FUEL PRE-FILTER CARTRIDGE
(PAGE 4-57)" respectively.
When emergency pump drive switch is at the up
(emergency) position, normal operations become possible,
but have inspection carried out immediately. (*1)
Have inspection carried out immediately.
Have inspection carried out immediately.
Operate machine to a safe posture and have inspection
carried out immediately.
Operate machine to a safe posture and have inspection
carried out immediately.
If a display of "CA2249" or "CA559" appears in the user
code screen and yet the machine has not run out of fuel,
replace both fuel main filter element and fuel pre-filter
element immediately. (*2)
If the display of "CA2249" or "CA559" still does not
disappear after the replacement, ask your Komatsu
distributor for an inspection immediately, even though
normal operation of the machine is still possible.
On the other hand, if any other code than "CA2249" and
"CA559" appears in the user code screen, again ask your
Komatsu distributor for an inspection immediately, even
though normal operation of the machine is still possible.
Operate machine to a safe posture and have inspection
carried out immediately.
TROUBLES AND ACTIONS
Action
3 - 205

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pc220lc-8Pc200lc-8Pc220-8Pc200-8Pc220-85001

Table of Contents