Introduction; Use Of Machine; Directions Of Machine; Visibility From Operator's Seat - Komatsu ecot3 Operation And Maintenance Manual

INTRODUCTION

INTRODUCTION

USE OF MACHINE

This Komatsu machine is designed to be used mainly for the following work:
Digging work
Leveling work
Ditching work
Loading work
Demolition work
See the section "RECOMMENDED APPLICATIONS (PAGE 3-167)" for further details.

DIRECTIONS OF MACHINE

(A) Front
(B) Rear
(C) Left
(D) Right
In this manual, the terms front, rear, left, and right refer to the travel direction as seen from the operator's seat when
the operator's seat is facing the front and the sprocket is at the rear of the machine.

VISIBILITY FROM OPERATOR'S SEAT

This machine complies with the visibility standard (ISO 5006).
This machine maintains a close visibility of a height of 1.5 m at a point 1 m away from the outside surface of the
machine, and a visibility for a circumference of 12 m.

PROTECTIVE STRUCTURE

This machine is ROPS compliant to ISO12117-2:2008 when a ROPS plate is installed - see "LOCATION OF
SAFETY LABELS (PAGE 2-6)" for location of ROPS plate.
1 - 4
(E) Operator's seat
(F) Sprocket
FOREWORD