Heat Level Control - Silvercrest 406565 2207 Operating Instructions Manual

NOTE
► The first time the appliance heats up, a small amount of smoke and odour
may be generated due to production-related residue. This is normal and is
completely harmless. Ensure sufficient ventilation; for example, by opening
a window.
9) After heating, pull the plug out of the mains socket and allow the appliance
to cool down completely.
10) Clean the appliance again with a damp cloth.

Heat level control

The temperature is set using the heat level control 6.
–
Heat level range 1: heating up range / low temperature
–
Heat level range 2: medium temperature (e.g. cooking vegetables)
–
Heat level range 3: high temperature (e.g. grill-roasting meat)
Heat level range 3
NOTE
The green „Ready" control lamp 5 lights up when the heat level control 6
►
is set to MIN or in the front area of the heat level range 1. As soon as you
set the heat level control 6 to the desired position, the green control lamp
"Ready" 5 goes out until the temperature has been reached.
The green control lamp "Ready" 5 may switch off again in the interim. This
►
indicates that the temperature has fallen below the set temperature and the
appliance is heating up again.
The red control lamp "Power" 4 lights up as soon as the appliance is con-
►
nected to the mains.
SKGE 2000 C3
Heat level range 1
Heat level range 2
│ 9
GB│IE
■