Connecting To The Hp 10269C - HP 10314D User Manual

Connecting to
the HP 10269C
HP16S40/
16S41A,D
Logic Analp.er
Pod
Master Card, Pod 1
*Exp. Card 2, Pod 1
*Exp. Card 1, Pod 1
*Exp. Card 1, Pod 2
*Exp. Card 1, Pod 3
Connect the logic analyzer
pods
to the HP 10269C General Purpose
Probe Interface as listed in table 1-1. Note that the logic analyzers are
grouped into three categories. These same groupings apply to the
configuration files.
Table 1-1. Connections
HP16S11B All Other
HP10269C
Logic Analyur Logic Analp.ers (Into)
Pod Pod
Connector
Expander Card, Pod 1 1 1
Expander Card, Pod 2 2
2
Expander Card, Pod 3 3 3
Expander Card, Pod 4
4 4
Expander Card, Pod
5 5 5
• For the HP 16S41A,D Expander Cards,
.&p.
Card 1 refers
to
the
physically
highest HP16S41A,D card, and
.&p.
Card 2
refers to the next
physically highest HP 16S41A,D card (see figure 14).
Table 1-2. Configuration and Inverse Assembler Files
Logic Configuration
Analp.er Filename
HP 16540/16541A,D
E80386D_I
HP 16511B D80386D_I
all others
C80386D_I
HP 16540/16541A,D E80386D_87
HP16511B D80386D_87
all others
C80386D_87
Setting Up the HP 103140
1-10
Inverse
Assembler
Filename
1803860_1
180386D_I
180386D_I
I80386D_87
180386D_87
180386D_87
Capability
Works with all coprocessors. Does
not attempt to decode the
coprocessor instructions when an
ESC instruction is encountered.
Works with systems that use only
80287 /80387 coprocessors. When
an ESC instruction is encountered,
the inverse assembler decodes the
math coprocessor operation.
HP 103140
80386DX Preprocessor Interface