Product Description; Installation - Electrolux ED30S Instruction Manual

19 electrolux product description

Product description

Parts names
1
2
3
4
5
6
7
Child safety switch
1
Hot water button
2
Ambient water button
3
Cold water button
4
Spout
5
Water collector grid
6
Storage space
7
8 9 10
11
12
8 Cooling switch
9 Heating switch
Power cord
10
Outlet of hot water
11
Condenser
12

Installation

Placement
Use the appliance indoors, where is no likelihood of rain or bad weather, as
there is damage risk to the product electrical system.
Place dispenser upright The product must be installed in an easily accessible
location in case of repairs.
Place dispenser upright on a flat surface and keep a minimum distance of
25cm from the wall. Make sure that the ventilation openings of the product are
not being obstructed.
Assemble
1. Remove drip tray from door and place the grid on top.
2. Snap drip tray and grid assembly into door.
Important
Do not install the water dispenser in a
location where there is a direct impact
of sunlight or near heat sources, as a
stove, oven, etc.
Attention
Never turn the appliance upside down
or tilt it more than 45°.
Warning
Do not plug in the device unless the
water bottle is already installed.
installation electrolux 20
Max. 45°C