Huawei FusionSolar SUN2000 Commissioning Manual page 14

FusionSolar Smart PV Solution-Device Replacement
Commissioning Guide
Procedure
Step 1 Set the IP address of the PC. Ensure that the IP address is in the same subnet as
that of the SmartLogger.
Table 3-2 IP address settings description
Device
Note
SmartLogger3000
Other SmartLogger
models
Note:
● When the IP address of the WAN port is in the 192.168.8.1–192.168.8.255 network, the IP
address of the LAN port is automatically switched to 192.168.3.10 and the default gateway is
set to 192.168.3.1. If your PC is connected to a LAN port, you need to adjust the network
configuration of the PC.
● It is recommended that the PC be connected to the LAN port of the SmartLogger or the GE
port of the SmartModule. When the PC is connected to the GE port of the SmartModule, adjust
the network configuration of the PC in the same way as when the PC is connected to the LAN
port of the SmartLogger.
Step 2 Enter https://XX.XX.XX.XX (IP address of the SmartLogger) in the address bar of
your browser. When you log in to the WebUI for the first time, a security risk
warning is displayed. Click Continue to this website (not recommended).
Step 3 Log in to the WebUI.
Issue 01 (2021-04-30)
NO TE
The screenshots in this section are taken from SmartLogger V300R001C00SPC040.
IP Address Settings
WAN IP address
port
Subnet
mask
Default
gateway
LAN port IP address
Subnet
mask
Default
gateway
IP address
Subnet mask
Default gateway
Copyright © Huawei Technologies Co., Ltd.
3 Software Download or Platform Login Methods
Default Value on the
SmartLogger
192.168.0.10
255.255.255.0
192.168.0.1
192.168.8.10
255.255.255.0
192.168.8.1
192.168.0.10
255.255.255.0
192.168.0.1
Example PC Setting
192.168.0.11
255.255.255.0
192.168.0.1
192.168.8.11
255.255.255.0
192.168.8.1
192.168.0.11
255.255.255.0
192.168.0.1
10