Huawei FusionSolar SUN2000 Commissioning Manual page 33

FusionSolar Smart PV Solution-Device Replacement
Commissioning Guide
When a faulty SmartLogger3000 is replaced with a new SmartLogger3000, the
files do not include certificate-related files. After all files are imported, you need to
reload the third-party certificate on the WebUI if required.
----End
Setting Parameters on the LCD
Step 1 Install the USB flash drive to the SmartLogger1000.
Step 2 Export configurations on the LCD of the SmartLogger1000.
Figure 5-6 Exporting SmartLogger1000 configurations
Step 3 Insert the USB flash drive that stores the exported files into the USB port on the
new SmartLogger3000.
Step 4 Log in to the app and import data.
Issue 01 (2021-04-30)
NO TICE
NO TE
● Configuration export and import needs to be performed using a USB flash drive.
SanDisk, Netac, and Kingston USB flash drives are supported. USB flash drives of other
brands are not tested for compatibility and may not be recognized.
● The SmartLogger1000 can be maintained locally on the LCD.
Copyright © Huawei Technologies Co., Ltd.
5 Replacing the SmartLogger3000/
SmartLogger2000/SmartLogger1000A/
SmartLogger1000 with the SmartLogger3000
29