Table of Contents
Advertisement
How to deal with cooking failure (continued)
This time
Fail to press button for
operation
The light goes out
It stops halfway
Displayed residual time
actual cooking time
The keep warm time is
The buzzer sounds and
the trouble code appears
The clock restarts
from 12:00
It sends out sound
during use
With scent of plastic and
others
Some parts on plastic
spare parts are presented
in linear or wave shape
There is a gap between
upper housing and body
There is the scratch or
dirt on coating outside
the inner cooking pot
Sparks when plugging
in or pulling out the
power plug
Tripping of circuit
breaker during cooking
Investigate the reasons
Whether the power plug is plugged in? Whether the inner cooking pot is well placed?
Please refer to the "About display of cooking time" for detsa.il
This is a reminder of long time keep-warm. Please stop keeping warm.
Refer to "Error Display" on page 24.
Please refer to the "Sound in use" on Page 9.
"Buzz" is the sound of the fan working, "squeak" is the sound of power on, and "chou~" is the sound of
steam blowing out.
When starting to use, there may be an odor, which will gradually disappear with the use.
Eliminate the unpleasant odor by ventilating and cleaning by boiling.
There will be gap more or less between upper housing and body, but the machine is closed with the sealing ring.
As the using time increases, there will be scratch or dirt on coating on the outer side of the inner cooking pot,
Small sparks may occur when plugging and unplugging the power plug.
This is an inherent condition of the induction heating method and is not a malfunction.
In the case of being used together with other electric products, sometimes it may exceed the rated current of
the circuit breaker.
Please use a separate power socket.
Please perform an inspection
before requesting repairs
23
Advertisement
Table of Contents
