Technical Data - Husqvarna BS 75 Operator's Manual

8. Tilt the lifting handle (E) forward.
E
9. Remove the 2 locking pins (F).
10. Lock the lifting handle in the forward position with the
locking pins.
11. Assemble in the opposite sequence.
Rated power, hp/W
Drive motor power, hp/W
Vibration motor power, hp/W
Rated voltage, V
Rated frequency, Hz
Rated current, A
1804 - 003 - 28.08.2023
To put the product in storage position
1. Loosen the handle adjustment knob.
F
2. Fold the upper part of the handle forward.
3. Tighten the handle adjustment knob.
Storage of the product
• Storage of the product must be indoors only.
• Put the product in storage position. Refer to
the product in storage position on page 25 .
• Keep the product in a locked area to prevent access
for children or persons that are not approved.
• Keep the product in a dry and frost free area.
Disposal of the product
• Obey the local recycling requirements and applicable
regulations.
• When the product no longer is used, send it to
a Husqvarna dealer or discard it at a recycling
location.

Technical data

BS 75 1x120V BS 110 1x120V
2/1492
1/746
1/746
120
50/60
15
To put
25