Table of Contents
Advertisement
time, only one SIM card is active and functional, the SIM slot 1 and SIM slot 2 can not be used
simultaneously. If you have only one SIM card, it is recommended to insert your SIM card to the SIM slot 1.
To install a SIM card into the SIM tray, perform the following steps:
1. Remove the AP-605CM12 cellular module from the AP-605R access point.
a. Unfasten the two M3 captive screws using a Phillips screwdriver
b. Press the mounting tab on the cellular module, and pull the cellular module out. See
Figure 7 Removing Cellular Module from the Access Point
1
2
2. Find the SIM ejector needle at the bottom of the cellular module. See
Figure 8 SIM Ejector Needle Location
8
|
Captive screws
Mounting tab
Figure
2
Rev 03|August 2023
7.
Advertisement
Table of Contents
