HP 600R Series Installation Manual page 9

3. Insert the SIM ejector needle into the small hole on the SIM card tray. The SIM card tray will pop open.
See Figure 9.
Figure 9 Opening the SIM Card Tray
4. Pull out the SIM card tray and insert a SIM card into the SIM tray.
5. Push the SIM card tray back into the slot. See
Figure 10 Inserting a SIM Card
6. Align the AP-605CM12 cellular module with the opening in the access point.
7. Insert the AP-605CM12 cellular module into the access point and tighten the two M3 captive screws
using a Phillips screwdriver. See
Rev 03 | August 2023
Figure 10.
Figure 11.
| 9