Safety And Instructional Decals - Toro Multi-Pro 1250 Operator's Manual

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area of
potential danger. Replace any decal that is damaged or lost.
1. Read the Operator's Manual.
1. Machine speed
2. To set the machine to a slow speed, reduce pressure on the
accelerator and pull up on the speed limiter.
3. To set the machine to a fast speed, press the accelerator
pedal and push down on the speed limiter.
1. Spray on
104-7628
100-8458
100-8619
2. Spray off
117–2718
1. Read the Operator's Manual for information on the
transmission.
2. To start the engine, sit on the operator's seat, press the
brake, set the range selector to Neutral, turn the ignition
key to Engine-start, set the range selector to the desired
gear, release the brake and parking brake, and press the
accelerator pedal to the desired speed.
3. To stop the engine, press the brake, set the range selector
to Neutral, set the parking brake, and turn the ignition key
to Engine-stop.
4. Range selector gear pattern
8
100-8454