Dell 0HRTG Service Manual page 31

About this task
Steps
1. Replace the WLAN card into the M.2 Slot on the system board.
2. Connect the WLAN antenna cables to the connectors on the WLAN card.
NOTE:
Table 3. WLAN Antenna Cables
Cable color
White
Black
3. Place the WLAN card bracket to secure the WLAN antenna cables to the WLAN card.
4. Replace the single (M2x3) screw to secure the WLAN bracket and the WLAN card to the palmrest.
Next steps
1. Connect the battery cable.
2. Install the base cover.
3. Install the SD card.
4. Follow the procedure in after working inside your
Indicator on WLAN
White triangle
Black triangle
computer.
Disassembly and reassembly 31