Heat Sink; Removing The Heatsink - Uma - Dell 0HRTG Service Manual

About this task
Steps
1. Align and place the fan on the palm rest.
2. Replace the two screws (M2.5x5) that secure the fan to the palmrest.
3. Connect the fan cable to the connector on the system board .
Next steps
1. Reconnect the battery
2. Replace the base cover.
3. Replace the SD card.
4. Follow the procedure in

Heat sink

Removing the Heatsink - UMA

Prerequisites
1. Follow the procedure in
2. Remove the SD card.
3. Remove the base cover.
4. Disconnect the battery
cable.
after working inside your
before working inside your
cable.
computer.
computer.
Disassembly and reassembly 41