Next steps
1. Install the camera.
2. Install the
display
panel.
3. Install the
display
bezel.
4. Install the
display
assembly.
5. Install the WLAN.
6. Connect the
battery
cable.
7. Install the
base
cover.
8. Install the
SD
card.
9. Follow the procedure in
Power button
Removing the power button
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Disconnect the
battery
5. Remove the
IO
board.
66
Disassembly and reassembly
after working inside your
before working inside your
cable.
computer.
computer.