Toshiba DST-3100 Owner's Manual page 28

Installation
®
DIRECTV Satellite Dish Antenna and Antenna/Cable (continued)
Configuring your receiver to work with a DIRECTV Satellite Dish Antenna and Antenna/Cable.
Local Guide Setup Screen
1
Press or to highlight Primary Antenna Area
and then press SELECT.
The Primary Area specifies what terrestrial
program information should appear in the Guide.
2
Press or to highlight to the ZIP Code field.
Use the numbered keys on the remote to enter
your ZIP code.
After you have entered the last digit of your zip
code, the system will list the available providers
in your area.
3
Press , then
Press SELECT.
4
Press or to navigate to Secondary Antenna
Area and then press SELECT.
The Secondary Area specifies what additonal
terrestrial program information should appear in
the Guide.
Follow steps 2–3 above.
5
Press or to highlight Cable Provider Area and
then press SELECT.
The Cable Provider specifies what cable
program information should appear in the on-
screen program guide.
Follow steps 2–3 above.
28
or to highlight your provider.
If you are connected a terrestrial antenna or local cable TV
service to view local analog or digital channels, you need to
configure the DST-3100 receiver to receive these
broadcasts.
Notes
• If you do not have cable service connected to the DST-3100,
it is not necessary to complete step 5.