Remote Control Rf Settings - Toshiba DST-3100 Owner's Manual

Remote Control RF Settings

RF Settings
RF Remote Screen
1
Press MENU.
MENU
The Main Menu appears.
2
Press or to highlight the Setup Menu
icon.
3
Press to highlight Remote Control.
Press SELECT.
4
Press or to change the RF Remote
Control code.
5
Press to highlight Save and press
SELECT.
The RF remote control must use a different RF
remote code than any other RF device close to it.
Use the RF Remote screen to set this code.
You also must program the same RF code into
the remote control that you select in the RF
Remote screen. If you ever have interference
issues with the remote control, try changing this
setting.
Programing the RF Code into the Remote Control:
1
Set the SAT/TV1/TV2 switch on the left
side of the remote control to SAT.
While holding down MUTE, press the
2
numbered buttons to enter the RF code
(0–4) you selected on the RF Remote
screen.
Note: 0 will turn the RF off.
Note: The Default setting for the RF remote is
OFF.
87