16
COOLING SYSTEM
(All 250/300 models)
–
Make sure that screw
–
Position the motorcycle upright.
–
Completely fill the radiator with coolant.
Coolant (
V00376-10
–
Loosen screw
–
Mount and tighten screw
Guideline
Bleeder screw, cylinder head
V00380-10
–
Completely fill the radiator with coolant.
Coolant (
–
Mount radiator cap
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result
in unconsciousness and death.
–
V00379-10
–
–
Allow the engine to warm up and cool down again.
Finishing work
–
Check the coolant level. (
is tightened.
p. 141)
and wait until coolant escapes without bubbles.
.
p. 141)
.
Always make sure there is sufficient ventilation when running the
engine.
Use an effective exhaust extraction system when starting or running the
engine in an enclosed space.
p. 100)
M6
10 Nm
(7.4 lbf ft)
102