Table of Contents
Advertisement
17
TUNING THE ENGINE
–
Remove cap
insert
–
Pull both springs off of the spring insert.
B00056-11
–
Mount the required auxiliary spring (
and position them together in the clutch cover.
(125 XC‑W EU)
Auxiliary spring with yellow marking (54637072300)
Auxiliary spring with green marking (54837072100)
Auxiliary spring with blue color coding (54637072500)
(150 XC‑W US)
Auxiliary spring without color coding (50437069050)
E00373-10
Auxiliary spring with yellow marking (54637072300)
The recess in spring insert
–
Check the O-ring in the cap.
–
Position the cap.
–
Mount and tighten the screws.
Guideline
Screw, exhaust control cover
(125 XC‑W EU)
Screw, exhaust control cover
(150 XC‑W US)
(All 250/300 models)
–
Remove screws
E00364-10
–
Remove cap
insert
–
Pull both springs off of the spring insert.
B00056-11
, adjusting spring
from the clutch cover.
Info
Screw
must not be turned as this would worsen the engine charac-
teristic.
.
, adjusting spring
from the clutch cover.
, auxiliary spring
, and spring
p. 108)
and adjusting spring
engages in the angle lever.
M5
6 Nm (4.4 lbf ft)
M5
6 Nm (4.4 lbf ft)
, auxiliary spring
, and spring
109
Advertisement
Table of Contents
