Table of Contents
Advertisement
15
ELECTRICAL SYSTEM
15.2
Installing the battery
15.3
Recharging the battery
Warning
Environmental hazard Batteries contain environmentally-hazardous materials.
–
Do not dispose of batteries as household waste.
–
Dispose of batteries at a collection point for used batteries.
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance with the applicable regu-
lations.
Info
Even when there is no load on the battery, it discharges steadily.
The charging level and the method of charging are very important for the service life of the battery.
Rapid recharging with a high charging current shortens the service life of the battery.
If the battery is depleted by repeated starting, the battery must be charged immediately.
(All 250/300 models, XC‑W US, XC‑W Six Days US)
Main work
–
Insert the battery into the battery compartment with the terminals facing forward
and secure with holding bracket
(XC‑W US, XC‑W Six Days US, All 250/300 EU/AU/US models)
Battery (HJTZ5S-FP) (
(300 EXC BR)
Battery (YTX5L-BS) (
–
Mount and tighten screw
Guideline
Remaining screws, chassis
–
Connect positive cable
Guideline
Screw, battery terminal
–
Slide positive terminal cover
–
Connect negative cable
H00386-10
Guideline
Screw, battery terminal
Contact disks
the claws toward the battery terminal.
Finishing work
–
Mount the seat. (
(All 250/300 models, XC‑W US, XC‑W Six Days US)
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the seat. (
–
Remove the battery.
.
p. 127)
p. 127)
.
to the battery.
over the positive terminal.
to the battery.
must be mounted under screws
p. 61)
p. 61)
(
p. 90)
M6
10 Nm (7.4 lbf ft)
M5
2.5 Nm
(1.84 lbf ft)
M5
2.5 Nm
(1.84 lbf ft)
and cable sockets
91
with
Advertisement
Table of Contents
