Kenwood 107VR Instruction Manual page 21

fal
107VR (En)
The surround modes aliow you to enjoy the feeling of presence in music. Select the mode according to the source or components
played. For the connections of the surround and/or center speakers, refer to "Connection of speakers". 6.
DOLBY PRO LOGIC surround mode
Video, DVD and LD software programs car-
rying the [X)j(pasv simowno)} mark contain re- Center speaker
cording of the same Dolby Surround data as f
those used in movie theaters.
The DOLBY PRO LOGIC surround mode uses
the Dolby Surround data and brings into
home a similar sound field with full of pres-
ence to movie theatres. Front speake-
To use this mode, connect the surround
{and center) speakers.
Surround speaker
Surround speaker
in case center speaker is not used
Front speaker
DOLBY 3 STEREO mode
If the left and right speakers are installed apart from each other,
the center acoustic image (words, etc.) may vary depending on
the listener's position. The DOLBY 3 STEREO mode provides an
improved positioning of the center acoustic image regardiess of
the listening position.
Use this mode when playing videotape, DVD or LD software
carrying the [X] focusy suajowo] mark. Front speaker
To use this mode, connect the center speaker.
DSP LOGIC mode
DSP LOGIC lets you enjoy the atmosphere of a movie theater in
your listening room. By adding the reverberation aspects of a
movie theater to the sound from the original music source, you
can enjoy the soundscape of either a LARGE or SMALL movie
theater. Be sure to connect surround and center speakers when
using this mode.
Center speaker
Front speaker
Surround speaker
DSP presence mode
. : ; : Center speaker
This mode provides a live atmosphere to music sources. By E
adding the reverberation component of one of the three sound
fields of this mode, it allows to enjoy three kinds of sound fields
(ARENA, JAZZ CLUB, STADIUM) with full of feeling of presence.
The sound field can be selected according your tiking.
To use this mode, connect the surround speakers.
Front speaker
Surround speaker
Recommended speaker installation
at a height of about 7 meter higher than the listener's ears. Each surround speaker Should be installed so that the longer sides are
de tis recommended that the surround speakers are installed straight to the left and right of the listening position or slightly behind,
horizontal.
of sound echoed n various spaces} which determine the feeling of presence are created by digital processing by the DSP without
The DSP stands for Digital Signal Processor. In the DSP presence and DSP LOGIC modes, the reverberation components (elements
de spoiling the sound quality of the original music source.
a