Huawei Mic 500T Quick Start

Download this manual

Quick Start

HUAWEI Mic 500T

HUAWEI Mic 500T works with a whole range of Huawei video conferencing endpoints and supports

plug and play, delivering an entirely new high-fi stereo audio experience.

Parts List

Mic 500T

Adapting plate

Status Indicators

The Indicators Are...

Steady red

Steady blue

Blinking blue clockwise

Off

HD-AI cable (10 m)

1/4"-20UNC-7 mm screw

The Mic 500T Is...

Muted

Working properly

Connecting

Powered off

Quick Start

HUAWEI Mic 500T

Quick Start

M3x8 screw

Page 1 Quick Start HUAWEI Mic 500T HUAWEI Mic 500T works with a whole range of Huawei video conferencing endpoints and supports plug and play, delivering an entirely new high-fi stereo audio experience. Parts List Quick Start HUAWEI Mic 500T Mic 500T...
Page 2 Screw: 1/4"-20UNC Screw hole: 7 mm Cable Connections The HD-AI cable that comes with a Mic 500T is 10 meters long. It is used to connect the Mic 500T to a video conferencing endpoint or another Mic 500T. One Mic 500T Connect the IN port on the Mic 500T to the HD-AI port on the endpoint.
Page 3 To cascade the two Mic 500Ts, connect the HD-AI port on the endpoint to the IN port on the first Mic 500T. Then connect the port not marked by IN on the first Mic 500T to the IN port on the second Mic 500T.
Page 4 Placed horizontally Placed vertically Maintenance You can query the information about a Mic 500T through the web interface or CLI of the connected video conferencing endpoint. The Mic 500T information includes the model, logical version, ID, connection status, etc. To log in to the web interface, see the maintenance guide of the video conferencing endpoint.