Kenwood KD-4020 Instruction Manual page 10

Operating instructions
PLAY/CUT key
SPEED select key (33, 45}/indicators CUEING key
@ Manual play @ To stop the play temporarily
Turn the power on and set a record on the
turntable platter.
Press the CUEING key to momentarily stop playing.
The tonearm leaves the record.
CUEING
Advance the tonearm to the selected position
using MANUAL SEARCH (4) key.
To restart playing, press the CUEING key again. The
MANUAL SEARCH record play resumes almost the same position.
| es |
@ MANUAL SEARCH (<4) key advances the tonearm to the left,
and the MANUAL SEARCH (&) key advances the tonearm to | Ill To stop playback operation
the right.
If you wish to stop play operation part way through a
record, press the PLAY/CUT key. The tonearm will au-
tomatically return to the start position, and the turnta-
ble platter will stop turning.
3 Select the SPEED select key according to the
record.
PLAY/CUT lI
4. Press the CUEING key.
CUEING
®@ This lowers the stylus to the record and playing starts.
Control the volume with the VOLUME con-
trol on the amplifier.
Note:
Record play cannot be started within a radial distance of 63 mm
{2-1/2") from the center of the record.
matically.
aM on wk