Safety Labels - Sharp SW-130HT Instruction Manual

SAFETY LABELS

Please read through and understand the safety labels before operating the machine. Refer to
Illustration: Safety Labels.
Label
1-6
Meaning
Hazardous Voltage
TURN POWER OFF before
servicing. Failure to
following the warning can
result in severe injury.
Cutting Hazard
KEEP COVER CLOSED
while the blade is
running. Turn power off
before opening cover.
Failure to follow the
warning can result in
severe injury.
Please add antifreeze
coolant when the
ambient temperature is
below 0 C (32 F).
Impact Hazard
WEAR SAFET SHOES. Do
not approach dropping
area during operation.
Cutting Hazard
KEEP COVER CLOSED
while the blade is
running. Turn power off
before opening cover.
Failure to follow the
warning can result in
severe injury.
Label Meaning
DANGER: Running Blade
Blade runs through this area.
Keep your hands away from a
running blade to avoid severe
injury. The arrow indicates
direction of the blade.
Cutting Hazard
KEEP HAND OFF while the blade
is running. Turn power off
before opening cover. Failure to
follow the warning can result in
severe injury.
Loose Hand Hazard
KEEP HAND OFF. Do not touch
chip conveyor. Failure to follow
the warning can result in severe
injury.
Replace the hydraulic oil every
six months or every 1,200 hours
of operation.
Oil specification: Shell TELLUS 27
or Mobil DTE OIL LIGHT /
HYDRAULIC 28
Cutting Hazard
KEEP HAND OFF while the blade
is running. Turn power off
before opening cover. Failure to
follow the warning can result in
severe injury.