Safety Labels - Sharp SW-120NC Instruction Manual

SAFETY LABELS

Safety-related labels mounted on the machine are categorized into the following four categories.
Please read through and understand them before operating the machine. Refer to Illustration: Safety
Labels.
DANGER Labels
A red and white DANGER labels marks s hazards or unsafe practices that will result in severe personal
injury or death.
Label Meaning
Hazardous Voltage
TURN POWER OFF before
servicing. Failure to
following the warning can
result in severe injury.
WARNING Labels
An orange and black WARNING label marks hazards or unsafe practices that can result in severe
personal injury or damage to the machine.
Label Meaning
Cutting Hazard
KEEP COVER CLOSED while
the blade is running. Turn
power off before opening
cover. Failure to follow the
warning can result in severe
injury.
Please add antifreeze
coolant when the ambient
temperature is below 0 C
(32 F).
Impact Hazard
WEAR SAFET SHOES. Do not
approach dropping area
during operation.
1-6
Label Meaning
DANGER: Running Blade
Blade runs through this area. Keep
your hands away from a running
blade to avoid severe injury. The
arrow indicates direction of the
blade.
Label Meaning
Cutting Hazard
KEEP HAND OFF while the blade is
running. Turn power off before
opening cover. Failure to follow the
warning can result in severe injury.
Loose Hand Hazard
KEEP HAND OFF. Do not touch chip
conveyor. Failure to follow the
warning can result in severe injury.