Sharp SW-120NC Instruction Manual page 80

OIL RECOMMENDATION FOR MAINTENANCE
Item
Dovetail guide
Roller bearing
Bed roller / surface
Nipples of bearing
Blade tension device
Gear reducer
Hydraulic system
(if there is an oil tank)
Inserts
Band wheel Oil with lubricant, but not excess.
Bearing
Piston
Wire brush Oil with lubricant, but not excess.
1. Turn off the stop circuit breaker switch before servicing the machine.
2. Then post a sign to inform people that the machine is under maintenance.
8‐4
Method
Keep grease covered. Antirust.
Sweep clean and oil with lubricant.
Sweep clean and oil with lubricant.
Use grease gun, but not excess.
Use grease gun, but not excess.
After 600 hours of initial operation,
drain away the oil and clean the
internals of the machine, then refill
new oil. Do so hereafter every 1200
hours of operation.
After 600 hours of initial operation,
drain away the oil and clean the
internals of the machine, then refill
new oil. Do so hereafter every 1200
hours of operation.
Oil with lubricant, but not excess.
Oil with lubricant, but not excess.
Revolution Suggest oil
Daily Shell R2
Daily SEA #10
Daily SEA #10
Monthly Shell R2
Shell Alvania EP Grease 2
Monthly
Mobil Mobilphex 48
Shell Omala oil R220
Regularly
Mobil gear 630
Shell Tellus 32,
Regularly Mobil DTE Oil Light
Hydraulic 24
Daily
Weekly
Shell R2
6 Monthly
6 Monthly