Quick approach device
Split front vises
Gear reducer
OPTIONAL ACCESSORIES
Vise pressure regulator
Pressure
gauge
4‐18
This device allows the blade to quickly descend to just right above the
material to save you operation time.
The spilt vises are a clever design to make sure your workpiece is tightly
clamped by the two vises from both sides of the blade, maximizing
stability and cutting precision.
The specially designed gear reducer can work toward your preset blade
speed and torque.
Please refer to Section 8 for information on maintenance.
This adjustment valve is used to control vise pressure.
Adjust vise pressure based on the material of your workpiece.
When cutting pipes or soft materials, reduce vise pressure to
prevent exerted pressure from damaging the workpiece shape or
Pressure
exterior.
adjusting
valve
Do not adjust vise pressure at any time during cutting.
Vise pressure should never be lower than 8 kg/cm
2
.