Removing Shipping Bracket; Cleaning; Installing - Sharp SW-120NC Instruction Manual

REMOVING SHIPPING BRACKET


After the machine has been properly
positioned, remove the shipping bracket that is
used to lock the saw frame and the saw bed.

Retain this bracket so that it can be used again
in the event that your machine must be
relocated.

CLEANING

After the machine has been placed at the designated position, remove the rust-preventive grease
with wiping cloth dampened with cleaning oil or kerosene. Apply machine oil to machine surfaces
that are prone to rust.
Do not remove the rust-preventive grease with a metal scraper and do not wipe the
painted surfaces with solvent as doing so would damage surface paint.

INSTALLING

Our bandsaw machine is relatively easy to install. Follow these six easy steps to install your machine.
Supply
hydraulic oil
3-6
Connect
Supply
electric
cooalant
Level &
Anchor
power
Install roller
table
(Optional)